Archive | Projects & Plans RSS feed for this section

Build a Picture Frame to Hide a Gun with Plans

Hidden in Plain Sight What we are going to talk about will allow you to hide a gun, money or almost any small item you would like in plain view of anyone and they will have no clue it is there.  Since our purpose is for our own safety and we chose to show this […]

4 Comments Continue Reading →
thin-rip-1

Make Your Own Thin Rip Push Jig for a Table Saw

Keep those fingers safe! Ripping thin stock on the table saw can be a dangerous operation if you don’t have the proper safety accessories and protocol. For discussion purposes, we are going to classify “thin stock” as any material under 1.5″ wide. When cutting material on the table saw with the fence so close to […]

Leave a comment Continue Reading →
RBWA

Shop Made Router Base – Build It Yourself!

Build A Router Base In Woodworking, there are many items that you simply cannot buy.  Even if you can buy them, why would you when you can have the satisfaction of building them yourself with little to no cost.  A router base is a very popular project that is very simple to build.  In this […]

Leave a comment Continue Reading →
YT

Build Your Own Washer and Dryer Stand Video

Front Load Washer Stand Follow Andy with Workshop Addict go through his Washer and Drier Stand Builds and get ideas on how to build your own washer and drier stands for front load washers and driers. One of the first issues we had with our front load washers was making sure all of the clothes were […]

2 Comments Continue Reading →
Unit full of Dewalt Organizers

DIY Hardware Storage Cabinet with Plans Using Dewalt Organizers

Build Hardware Storage Shown in our free set of plans, the hardware storage cabinet uses Dewalt storage organizers that are spaced equally apart to provide a clean looking, well organized, and thoughtfully designed cabinet that is perfect for all sorts of organization. Screws, nails, nuts, bolts, and anything else that can be stored in the […]

Leave a comment Continue Reading →
IMG_3495

Miter Saw Station Plans with Drawers using Kreg Trak and Stop System

Perfect Miter Saw Bench The perfect miter saw bench includes drawers, a stop system for repeatable cuts and a perfectly flat surface to cut on.  Well, at least in our shop that is the perfect miter saw bench.  Each shop and each individual will have to decide what is perfect for their uses and shop. […]

8 Comments Continue Reading →
Show_Off3

F150 Rough Country 4″ Lift Installation

Lift It! Over the years we have installed countless lifts on all kinds of vehicles, even some cars.  Many have been for ourselves, but there have been quite a few for clients.  Almost all of them have been done on the floor without a lift and we would like to stress to you, with a […]

Leave a comment Continue Reading →
YT

Paper Towel Holder – Small Woodworking Project Plans

Paper Towel Holder Building something yourself and using it everyday is a very gratifying experience.  Our video on building a small paper towel holder is just a start to some of the projects that we will walk you through in the near future.  This project can be easily modified for looks and to do what […]

1 Comment Continue Reading →
Dog_Bowl_Stand

Raised Dog Bowl Stand Project

Small Pet Project Some of the most enjoyable woodworking projects are ones that are completed for family members, including pets.  The items we build, in some cases, make the first impression we have on visitors when they walk into our home.  Projects like the one John completed in the video above can be done in a short amount […]

2 Comments Continue Reading →
Atta_Boy_Stick

Funny Quick Woodworking Project – Atta Boy Stick

Hand on a Stick John came up with this fun project for a buddy at work who just couldn’t stop self-promoting himself.  He could only take so much and it led him to design the Atta-Boy Stick. This way, when no one else is praising him, he can just pick up his stick and pat himself on […]

Leave a comment Continue Reading →
IMG_20151025_160625102

Project – Paver Fire Pit

Recycle Pavers Our WA buddy works at a local brick shop and they have a lot of returns of different brick and pavers that are parts and pieces of kits.  These pavers are set aside and they try to use them in different projects.  We were lucky enough to get some to make a nice […]

1 Comment Continue Reading →
Done

Refinish a Wood Deck or Replace with Composite?

Wood still out sells composite deck boards at this time, but that might be due to the higher costs of composite deck material.  I recently moved into a 10 year old home that has three very large decks.  Two are wood and one is stone and from my experience, they all need some sort of maintenance. […]

2 Comments Continue Reading →